Also detected, no federal limit: PFBA, PFHxA, PFPeA, PFHpA.
Is there PFAS in Brownsville Public Utilities Board water?
Yes. EPA's final UCMR 5 results show Brownsville Public Utilities Board averaged 6.5 ppt of PFOS at its worst sampling point, 1.6 times the EPA limit of 4 ppt.
Brownsville Public Utilities Board is a public water system drawing on surface water, based in Brownsville, Texas, serving about 201,249 people. Under EPA's Fifth Unregulated Contaminant Monitoring Rule it was tested for 29 PFAS and lithium 8 times across 2 sampling points between Jul 2024 and Jun 2025.
Every PFAS detected
| PFAS | Detected | Highest | Worst point avg | EPA limit |
|---|---|---|---|---|
| PFBA Perfluorobutanoic acid |
7 of 8 | 9.3 ppt | 7.0 ppt | none |
| PFOS Perfluorooctanesulfonic acid |
7 of 8 | 9.2 ppt | 6.5 ppt | 4 ppt |
| PFHxA Perfluorohexanoic acid |
8 of 8 | 8.0 ppt | 5.9 ppt | none |
| PFPeA Perfluoropentanoic acid |
8 of 8 | 7.6 ppt | 5.7 ppt | none |
| PFOA Perfluorooctanoic acid |
1 of 8 | 4.7 ppt | 1.2 ppt | 4 ppt |
| PFHxS Perfluorohexanesulfonic acid |
8 of 8 | 4.4 ppt | 3.8 ppt | 10 ppt |
| PFHpA Perfluoroheptanoic acid |
2 of 8 | 4.1 ppt | 1.8 ppt | none |
Not detected: PFTA, PFTrDA, PFPeS, PFBS, PFNA, PFDoA, PFUnA, 11Cl-PF3OUdS, 9Cl-PF3ONS, ADONA, HFPO-DA, PFEESA, PFDA, NMeFOSAA, 6:2 FTS, NEtFOSAA, PFHpS, PFMBA, PFMPA, 8:2 FTS, 4:2 FTS, NFDHA.
Lithium, tested in the same program: highest 51.1 ppb, detected in 8 of 8 samples. EPA's health-based screening level is 10 ppb.
What the EPA limits mean here
In April 2024 EPA set enforceable limits of 4 ppt for PFOA and PFOS, 10 ppt each for PFHxS, PFNA and GenX, and a hazard index of 1 for mixtures. Utilities were given until 2029 to comply. In May 2026 EPA proposed keeping only the PFOA and PFOS limits and moving that deadline to 2031. Until that proposal is final, the 2024 limits stand.
Compliance is judged on a running annual average at each entry point, so we show the average at this system's worst sampling point next to its single highest result. UCMR 5 results do not by themselves put a utility in or out of compliance.
What you can do at home
Two routes work for PFAS. For drinking and cooking water only, a reverse osmosis system certified to NSF/ANSI 58 with a PFOA/PFOS reduction claim is the cheapest proven option. To treat every tap and shower, a whole-house carbon system with enough contact time works, but check that the maker has PFAS test data, not just a marketing claim. See the best filters for PFAS and how PFAS removal works.
Other systems in Texas
- Amarillo Municipal Water System 1 PFAS detected
- City of Grand Prairie above an EPA limit
- City of Georgetown 7 PFAS detected
- Mcallen Public Utility 1 PFAS detected
- City of Mckinney 1 PFAS detected
- Dallas Fort Worth International Airport 3 PFAS detected
All 1154 tested systems in Texas
ZIP codes served
78520 78521 78526
As reported by the utility to EPA. Neighbouring ZIPs are often split between systems; your water bill names yours.
Cite this page
Well & Tap. "PFAS in Brownsville Public Utilities Board water: EPA UCMR 5 results." Data: U.S. EPA Fifth Unregulated Contaminant Monitoring Rule, final release August 2026, PWSID TX0310001. https://wellandtap.com/pfas/texas/brownsville-public-utilities-board/
About this data
Source: U.S. EPA, UCMR 5 occurrence data, final release August 2026 (PWSID TX0310001). Population: EPA SDWIS. Averages count results below the reporting level as zero, the same convention EPA uses for running annual averages. Full method.