Also detected, no federal limit: PFPeA, PFHxA, PFBS.
Is there PFAS in Gettysburg Muni Auth water?
Yes. EPA's final UCMR 5 results show Gettysburg Muni Auth averaged 12.7 ppt of PFOS at its worst sampling point, 3.2 times the EPA limit of 4 ppt.
Gettysburg Muni Auth is a public water system drawing on surface water, based in Gettysburg, Pennsylvania, serving about 12,425 people. Under EPA's Fifth Unregulated Contaminant Monitoring Rule it was tested for 29 PFAS and lithium 16 times across 7 sampling points between Oct 2024 and Jul 2025.
Every PFAS detected
| PFAS | Detected | Highest | Worst point avg | EPA limit |
|---|---|---|---|---|
| PFOS Perfluorooctanesulfonic acid |
4 of 16 | 14.1 ppt | 12.7 ppt | 4 ppt |
| PFOA Perfluorooctanoic acid |
2 of 16 | 7.4 ppt | 6.8 ppt | 4 ppt |
| PFPeA Perfluoropentanoic acid |
3 of 16 | 5.0 ppt | 4.8 ppt | none |
| PFHxA Perfluorohexanoic acid |
2 of 16 | 4.1 ppt | 4.1 ppt | none |
| PFBS Perfluorobutanesulfonic acid |
5 of 16 | 3.7 ppt | 3.6 ppt | none |
Not detected: NMeFOSAA, NEtFOSAA, PFTA, PFTrDA, PFHpA, PFNA, PFDA, PFDoA, PFUnA, PFHpS, PFPeS, PFHxS, 11Cl-PF3OUdS, NFDHA, PFMBA, PFMPA, 8:2 FTS, 4:2 FTS, 6:2 FTS, PFBA, HFPO-DA, ADONA, 9Cl-PF3ONS, PFEESA.
Lithium, tested in the same program: highest 37.2 ppb, detected in 11 of 16 samples. EPA's health-based screening level is 10 ppb.
What the EPA limits mean here
In April 2024 EPA set enforceable limits of 4 ppt for PFOA and PFOS, 10 ppt each for PFHxS, PFNA and GenX, and a hazard index of 1 for mixtures. Utilities were given until 2029 to comply. In May 2026 EPA proposed keeping only the PFOA and PFOS limits and moving that deadline to 2031. Until that proposal is final, the 2024 limits stand.
Compliance is judged on a running annual average at each entry point, so we show the average at this system's worst sampling point next to its single highest result. UCMR 5 results do not by themselves put a utility in or out of compliance.
What you can do at home
Two routes work for PFAS. For drinking and cooking water only, a reverse osmosis system certified to NSF/ANSI 58 with a PFOA/PFOS reduction claim is the cheapest proven option. To treat every tap and shower, a whole-house carbon system with enough contact time works, but check that the maker has PFAS test data, not just a marketing claim. See the best filters for PFAS and how PFAS removal works.
Other systems in Pennsylvania
- Summit Township Water Authorit none detected
- Dallastown Yoe Water Auth none detected
- Pa Amer Water CO Brownell none detected
- Bear Valley Joint Auth 1 PFAS detected
- Quakertown Boro above an EPA limit
- Paw Huntsville none detected
All 390 tested systems in Pennsylvania
ZIP codes served
17325
As reported by the utility to EPA. Neighbouring ZIPs are often split between systems; your water bill names yours.
Cite this page
Well & Tap. "PFAS in Gettysburg Muni Auth water: EPA UCMR 5 results." Data: U.S. EPA Fifth Unregulated Contaminant Monitoring Rule, final release August 2026, PWSID PA7010019. https://wellandtap.com/pfas/pennsylvania/gettysburg-muni-auth/
About this data
Source: U.S. EPA, UCMR 5 occurrence data, final release August 2026 (PWSID PA7010019). Population: EPA SDWIS. Averages count results below the reporting level as zero, the same convention EPA uses for running annual averages. Full method.