No PFAS were detected in any of the 30 samples EPA's program collected.
City of Idaho Falls is a public water system drawing on groundwater, based in Idaho Falls, Idaho, serving about 69,450 people. Under EPA's Fifth Unregulated Contaminant Monitoring Rule it was tested for 29 PFAS and lithium 30 times across 15 sampling points between Oct 2023 and Apr 2024.
None of the 29 PFAS were found at or above EPA's minimum reporting levels (2 to 20 ppt depending on the compound).
Not detected: 8:2 FTS, HFPO-DA, PFBS, PFHpA, PFHxS, PFNA, PFOS, PFOA, PFDoA, PFUnA, 11Cl-PF3OUdS, ADONA, PFDA, PFBA, 4:2 FTS, PFMPA, PFPeA, PFMBA, PFEESA, NFDHA, PFPeS, PFHpS, 6:2 FTS, 9Cl-PF3ONS, NEtFOSAA, PFHxA, PFTrDA, NMeFOSAA, PFTA.
Lithium, tested in the same program: highest 57.4 ppb, detected in 30 of 30 samples. EPA's health-based screening level is 10 ppb.
In April 2024 EPA set enforceable limits of 4 ppt for PFOA and PFOS, 10 ppt each for PFHxS, PFNA and GenX, and a hazard index of 1 for mixtures. Utilities were given until 2029 to comply. In May 2026 EPA proposed keeping only the PFOA and PFOS limits and moving that deadline to 2031. Until that proposal is final, the 2024 limits stand.
Compliance is judged on a running annual average at each entry point, so we show the average at this system's worst sampling point next to its single highest result. UCMR 5 results do not by themselves put a utility in or out of compliance.
No PFAS action is needed on these results. If your water tastes or smells of chlorine, a whole-house city water filter is the usual fix.
All 61 tested systems in Idaho
83401 83402 83403 83404 83405
As reported by the utility to EPA. Neighbouring ZIPs are often split between systems; your water bill names yours.
Well & Tap. "PFAS in City of Idaho Falls water: EPA UCMR 5 results." Data: U.S. EPA Fifth Unregulated Contaminant Monitoring Rule, final release August 2026, PWSID ID7100039. https://wellandtap.com/pfas/idaho/city-of-idaho-falls/
Source: U.S. EPA, UCMR 5 occurrence data, final release August 2026 (PWSID ID7100039). Population: EPA SDWIS. Averages count results below the reporting level as zero, the same convention EPA uses for running annual averages. Full method.
