No PFAS were detected in any of the 2 samples EPA's program collected.
Trussville Utilities is a public water system drawing on groundwater, based in Trussville, Alabama, serving about 36,300 people, including Odenville, Springville, Trussville, Birmingham. Under EPA's Fifth Unregulated Contaminant Monitoring Rule it was tested for 29 PFAS and lithium 2 times across 1 sampling point between Sep 2024 and Mar 2025.
None of the 29 PFAS were found at or above EPA's minimum reporting levels (2 to 20 ppt depending on the compound).
Not detected: PFTrDA, PFTA, NMeFOSAA, PFBS, 11Cl-PF3OUdS, 9Cl-PF3ONS, ADONA, PFHpA, PFHxS, PFNA, PFOS, PFOA, PFDA, PFDoA, PFHpS, PFUnA, NEtFOSAA, HFPO-DA, PFBA, 6:2 FTS, 4:2 FTS, 8:2 FTS, PFMPA, PFPeA, PFMBA, PFEESA, NFDHA, PFPeS, PFHxA.
Lithium, tested in the same program: not detected.
In April 2024 EPA set enforceable limits of 4 ppt for PFOA and PFOS, 10 ppt each for PFHxS, PFNA and GenX, and a hazard index of 1 for mixtures. Utilities were given until 2029 to comply. In May 2026 EPA proposed keeping only the PFOA and PFOS limits and moving that deadline to 2031. Until that proposal is final, the 2024 limits stand.
Compliance is judged on a running annual average at each entry point, so we show the average at this system's worst sampling point next to its single highest result. UCMR 5 results do not by themselves put a utility in or out of compliance.
No PFAS action is needed on these results. If your water tastes or smells of chlorine, a whole-house city water filter is the usual fix.
All 307 tested systems in Alabama
35120 35146 35173 35210 35235
As reported by the utility to EPA. Neighbouring ZIPs are often split between systems; your water bill names yours.
Well & Tap. "PFAS in Trussville Utilities water: EPA UCMR 5 results." Data: U.S. EPA Fifth Unregulated Contaminant Monitoring Rule, final release August 2026, PWSID AL0000761. https://wellandtap.com/pfas/alabama/trussville-utilities/
Source: U.S. EPA, UCMR 5 occurrence data, final release August 2026 (PWSID AL0000761). Population: EPA SDWIS. Averages count results below the reporting level as zero, the same convention EPA uses for running annual averages. Full method.
