Well & TapHome Water Treatment Database

Is there PFAS in Pell City Water Works water?

Yes. EPA's final UCMR 5 results show Pell City Water Works averaged 6.8 ppt of PFOA at its worst sampling point, 1.7 times the EPA limit of 4 ppt.

Pell City Water Works Serves 17,586 people · 10 PFOA samples from 2 sampling points · Aug 2024 to May 2025 Average above an EPA limit
PFOA Perfluorooctanoic acid 6.8 ppt avg · max 15.0
EPA 4
PFOS Perfluorooctanesulfonic acid 2.5 ppt avg · max 5.5
EPA 4
Hazard index GenX, PFBS, PFNA, PFHxS combined 0.0 avg · max 0.1
EPA 1

Also detected, no federal limit: PFBS, PFPeA, PFHxA, PFBA, PFHpA.

Averages are for the worst sampling point, with non-detects counted as zero. Source: EPA UCMR 5.

Pell City Water Works is a public water system drawing on surface water, based in Pell City, Alabama, serving about 17,586 people. Under EPA's Fifth Unregulated Contaminant Monitoring Rule it was tested for 29 PFAS and lithium 10 times across 2 sampling points between Aug 2024 and May 2025.

Every PFAS detected

PFAS Detected Highest Worst point avg EPA limit
PFBS
Perfluorobutanesulfonic acid		 3 of 10 94.0 ppt 41.5 ppt none
PFPeA
Perfluoropentanoic acid		 3 of 10 47.0 ppt 21.2 ppt none
PFHxA
Perfluorohexanoic acid		 3 of 10 24.0 ppt 10.6 ppt none
PFBA
Perfluorobutanoic acid		 3 of 10 20.0 ppt 10.2 ppt none
PFOA
Perfluorooctanoic acid		 2 of 10 15.0 ppt 6.8 ppt 4 ppt
PFHpA
Perfluoroheptanoic acid		 2 of 10 6.0 ppt 2.6 ppt none
PFOS
Perfluorooctanesulfonic acid		 2 of 10 5.5 ppt 2.5 ppt 4 ppt

Not detected: PFUnA, 6:2 FTS, 11Cl-PF3OUdS, HFPO-DA, 9Cl-PF3ONS, PFMBA, 4:2 FTS, ADONA, PFEESA, NFDHA, PFPeS, PFHpS, PFMPA, 8:2 FTS, PFDA, PFNA, NEtFOSAA, PFDoA, PFTA, PFTrDA, NMeFOSAA, PFHxS.

Lithium, tested in the same program: not detected.

What the EPA limits mean here

In April 2024 EPA set enforceable limits of 4 ppt for PFOA and PFOS, 10 ppt each for PFHxS, PFNA and GenX, and a hazard index of 1 for mixtures. Utilities were given until 2029 to comply. In May 2026 EPA proposed keeping only the PFOA and PFOS limits and moving that deadline to 2031. Until that proposal is final, the 2024 limits stand.

Compliance is judged on a running annual average at each entry point, so we show the average at this system's worst sampling point next to its single highest result. UCMR 5 results do not by themselves put a utility in or out of compliance.

What you can do at home

Two routes work for PFAS. For drinking and cooking water only, a reverse osmosis system certified to NSF/ANSI 58 with a PFOA/PFOS reduction claim is the cheapest proven option. To treat every tap and shower, a whole-house carbon system with enough contact time works, but check that the maker has PFAS test data, not just a marketing claim. See the best filters for PFAS and how PFAS removal works.

Other systems in Alabama

All 307 tested systems in Alabama

ZIP codes served

35125 35128

As reported by the utility to EPA. Neighbouring ZIPs are often split between systems; your water bill names yours.

Cite this page

Well & Tap. "PFAS in Pell City Water Works water: EPA UCMR 5 results." Data: U.S. EPA Fifth Unregulated Contaminant Monitoring Rule, final release August 2026, PWSID AL0001204. https://wellandtap.com/pfas/alabama/pell-city-water-works/

About this data

Source: U.S. EPA, UCMR 5 occurrence data, final release August 2026 (PWSID AL0001204). Population: EPA SDWIS. Averages count results below the reporting level as zero, the same convention EPA uses for running annual averages. Full method.