Also detected, no federal limit: PFBS, PFPeA, PFHxA, PFBA, PFHpA.
Is there PFAS in Holtville Water System water?
Yes. EPA's final UCMR 5 results show Holtville Water System averaged 15.2 ppt of PFOS at its worst sampling point, 3.8 times the EPA limit of 4 ppt.
Holtville Water System is a public water system drawing on surface water, based in Deatsville, Alabama, serving about 12,600 people, including Deatsville, Marbury, Wetumpka. Under EPA's Fifth Unregulated Contaminant Monitoring Rule it was tested for 29 PFAS and lithium 4 times across 1 sampling point between Mar 2023 and Mar 2024.
Every PFAS detected
| PFAS | Detected | Highest | Worst point avg | EPA limit |
|---|---|---|---|---|
| PFBS Perfluorobutanesulfonic acid |
4 of 4 | 62.0 ppt | 57.2 ppt | none |
| PFPeA Perfluoropentanoic acid |
4 of 4 | 31.0 ppt | 24.6 ppt | none |
| PFHxA Perfluorohexanoic acid |
4 of 4 | 18.0 ppt | 15.3 ppt | none |
| PFOS Perfluorooctanesulfonic acid |
4 of 4 | 18.0 ppt | 15.2 ppt | 4 ppt |
| PFOA Perfluorooctanoic acid |
4 of 4 | 17.0 ppt | 14.3 ppt | 4 ppt |
| PFBA Perfluorobutanoic acid |
4 of 4 | 12.0 ppt | 10.2 ppt | none |
| PFHpA Perfluoroheptanoic acid |
4 of 4 | 6.6 ppt | 5.4 ppt | none |
Not detected: PFTrDA, PFMPA, PFTA, 8:2 FTS, NEtFOSAA, NMeFOSAA, PFEESA, 11Cl-PF3OUdS, PFUnA, HFPO-DA, PFMBA, PFHxS, ADONA, 9Cl-PF3ONS, PFDoA, PFDA, PFNA, 4:2 FTS, PFHpS, PFPeS, NFDHA, 6:2 FTS.
Lithium, tested in the same program: not detected.
What the EPA limits mean here
In April 2024 EPA set enforceable limits of 4 ppt for PFOA and PFOS, 10 ppt each for PFHxS, PFNA and GenX, and a hazard index of 1 for mixtures. Utilities were given until 2029 to comply. In May 2026 EPA proposed keeping only the PFOA and PFOS limits and moving that deadline to 2031. Until that proposal is final, the 2024 limits stand.
Compliance is judged on a running annual average at each entry point, so we show the average at this system's worst sampling point next to its single highest result. UCMR 5 results do not by themselves put a utility in or out of compliance.
What you can do at home
Two routes work for PFAS. For drinking and cooking water only, a reverse osmosis system certified to NSF/ANSI 58 with a PFOA/PFOS reduction claim is the cheapest proven option. To treat every tap and shower, a whole-house carbon system with enough contact time works, but check that the maker has PFAS test data, not just a marketing claim. See the best filters for PFAS and how PFAS removal works.
Other systems in Alabama
- Beauregard Water Authority none detected
- Perdido Bay Water, Sewer & Fpa none detected
- Rainbow City Utilities Board none detected
- Southside Water Works above an EPA limit
- Tuskegee Utilities Board 2 PFAS detected
- Columbiana Water Works none detected
All 307 tested systems in Alabama
ZIP codes served
36022 36051 36092
As reported by the utility to EPA. Neighbouring ZIPs are often split between systems; your water bill names yours.
Cite this page
Well & Tap. "PFAS in Holtville Water System water: EPA UCMR 5 results." Data: U.S. EPA Fifth Unregulated Contaminant Monitoring Rule, final release August 2026, PWSID AL0000540. https://wellandtap.com/pfas/alabama/holtville-water-system/
About this data
Source: U.S. EPA, UCMR 5 occurrence data, final release August 2026 (PWSID AL0000540). Population: EPA SDWIS. Averages count results below the reporting level as zero, the same convention EPA uses for running annual averages. Full method.