Skip to content
Well & TapHome Water Treatment Database

Is there PFAS in Clanton Water Department water?

Yes. EPA's final UCMR 5 results show Clanton Water Department averaged 21.5 ppt of PFOS at its worst sampling point, 5.4 times the EPA limit of 4 ppt.

Clanton Water Department Serves 13,500 people · 4 PFOA samples from 1 sampling point · Mar 2025 to Nov 2025 Average above an EPA limit
PFOA Perfluorooctanoic acid 19.5 ppt avg · max 26.0
EPA 4
PFOS Perfluorooctanesulfonic acid 21.5 ppt avg · max 28.0
EPA 4
PFHxS Perfluorohexanesulfonic acid 0.8 ppt avg · max 3.3
EPA 10
Hazard index GenX, PFBS, PFNA, PFHxS combined 0.1 avg · max 0.4
EPA 1

Also detected, no federal limit: PFBS, PFPeA, PFHxA, PFBA, PFHpA.

Averages are for the worst sampling point, with non-detects counted as zero. Source: EPA UCMR 5.

Clanton Water Department is a public water system drawing on surface water, based in Clanton, Alabama, serving about 13,500 people. Under EPA's Fifth Unregulated Contaminant Monitoring Rule it was tested for 29 PFAS and lithium 4 times across 1 sampling point between Mar 2025 and Nov 2025.

Every PFAS detected

PFAS Detected Highest Worst point avg EPA limit
PFBS
Perfluorobutanesulfonic acid
4 of 4 85.0 ppt 62.8 ppt none
PFPeA
Perfluoropentanoic acid
4 of 4 31.0 ppt 22.5 ppt none
PFOS
Perfluorooctanesulfonic acid
4 of 4 28.0 ppt 21.5 ppt 4 ppt
PFOA
Perfluorooctanoic acid
4 of 4 26.0 ppt 19.5 ppt 4 ppt
PFHxA
Perfluorohexanoic acid
4 of 4 19.0 ppt 14.5 ppt none
PFBA
Perfluorobutanoic acid
4 of 4 13.0 ppt 9.7 ppt none
PFHpA
Perfluoroheptanoic acid
4 of 4 6.8 ppt 5.1 ppt none
PFHxS
Perfluorohexanesulfonic acid
1 of 4 3.3 ppt 0.8 ppt 10 ppt

Not detected: 11Cl-PF3OUdS, 9Cl-PF3ONS, ADONA, HFPO-DA, PFUnA, PFMPA, 6:2 FTS, PFMBA, PFEESA, NFDHA, PFPeS, PFHpS, 8:2 FTS, PFTrDA, PFTA, NMeFOSAA, NEtFOSAA, 4:2 FTS, PFNA, PFDA, PFDoA.

Lithium, tested in the same program: not detected.

What the EPA limits mean here

In April 2024 EPA set enforceable limits of 4 ppt for PFOA and PFOS, 10 ppt each for PFHxS, PFNA and GenX, and a hazard index of 1 for mixtures. Utilities were given until 2029 to comply. In May 2026 EPA proposed keeping only the PFOA and PFOS limits and moving that deadline to 2031. Until that proposal is final, the 2024 limits stand.

Compliance is judged on a running annual average at each entry point, so we show the average at this system's worst sampling point next to its single highest result. UCMR 5 results do not by themselves put a utility in or out of compliance.

What you can do at home

Two routes work for PFAS. For drinking and cooking water only, a reverse osmosis system certified to NSF/ANSI 58 with a PFOA/PFOS reduction claim is the cheapest proven option. To treat every tap and shower, a whole-house carbon system with enough contact time works, but check that the maker has PFAS test data, not just a marketing claim. See the best filters for PFAS and how PFAS removal works.

Other systems in Alabama

All 307 tested systems in Alabama

ZIP codes served

35045 35046

As reported by the utility to EPA. Neighbouring ZIPs are often split between systems; your water bill names yours.

Cite this page

Well & Tap. "PFAS in Clanton Water Department water: EPA UCMR 5 results." Data: U.S. EPA Fifth Unregulated Contaminant Monitoring Rule, final release August 2026, PWSID AL0000213. https://wellandtap.com/pfas/alabama/clanton-water-department/

About this data

Source: U.S. EPA, UCMR 5 occurrence data, final release August 2026 (PWSID AL0000213). Population: EPA SDWIS. Averages count results below the reporting level as zero, the same convention EPA uses for running annual averages. Full method.