Also detected, no federal limit: PFBA, PFHxA, PFPeA, PFHpA.
Is there PFAS in Albertville Utilities Board water?
Yes. EPA's final UCMR 5 results show Albertville Utilities Board averaged 6.1 ppt of PFOA at its worst sampling point, 1.5 times the EPA limit of 4 ppt.
Albertville Utilities Board is a public water system drawing on surface water, based in Albertville, Alabama, serving about 29,367 people. Under EPA's Fifth Unregulated Contaminant Monitoring Rule it was tested for 29 PFAS and lithium 8 times across 1 sampling point between Apr 2024 and Jan 2025.
Every PFAS detected
| PFAS | Detected | Highest | Worst point avg | EPA limit |
|---|---|---|---|---|
| PFOA Perfluorooctanoic acid |
6 of 8 | 11.0 ppt | 6.1 ppt | 4 ppt |
| PFBA Perfluorobutanoic acid |
2 of 8 | 9.6 ppt | 2.4 ppt | none |
| PFHxA Perfluorohexanoic acid |
7 of 8 | 5.8 ppt | 4.3 ppt | none |
| PFPeA Perfluoropentanoic acid |
6 of 8 | 5.3 ppt | 3.2 ppt | none |
| PFHpA Perfluoroheptanoic acid |
3 of 8 | 5.2 ppt | 1.7 ppt | none |
| PFOS Perfluorooctanesulfonic acid |
5 of 8 | 4.8 ppt | 2.8 ppt | 4 ppt |
Not detected: HFPO-DA, PFTrDA, NEtFOSAA, PFTA, 4:2 FTS, PFHpS, 6:2 FTS, PFMPA, 8:2 FTS, NMeFOSAA, PFNA, PFHxS, PFMBA, ADONA, PFEESA, PFPeS, PFDA, PFDoA, PFUnA, 11Cl-PF3OUdS, 9Cl-PF3ONS, PFBS, NFDHA.
Lithium, tested in the same program: not detected.
What the EPA limits mean here
In April 2024 EPA set enforceable limits of 4 ppt for PFOA and PFOS, 10 ppt each for PFHxS, PFNA and GenX, and a hazard index of 1 for mixtures. Utilities were given until 2029 to comply. In May 2026 EPA proposed keeping only the PFOA and PFOS limits and moving that deadline to 2031. Until that proposal is final, the 2024 limits stand.
Compliance is judged on a running annual average at each entry point, so we show the average at this system's worst sampling point next to its single highest result. UCMR 5 results do not by themselves put a utility in or out of compliance.
What you can do at home
Two routes work for PFAS. For drinking and cooking water only, a reverse osmosis system certified to NSF/ANSI 58 with a PFOA/PFOS reduction claim is the cheapest proven option. To treat every tap and shower, a whole-house carbon system with enough contact time works, but check that the maker has PFAS test data, not just a marketing claim. See the best filters for PFAS and how PFAS removal works.
Other systems in Alabama
- Prichard Water Works Board none detected
- West Morgan-east Lawrence Water Authorit none detected
- North Baldwin Utilities 2 PFAS detected
- Jasper Water Works and Sewer Board none detected
- Chilton Water Authority none detected
- Oxford Water Works & Sewer Board 2 PFAS detected
All 307 tested systems in Alabama
ZIP codes served
35950 35951
As reported by the utility to EPA. Neighbouring ZIPs are often split between systems; your water bill names yours.
Cite this page
Well & Tap. "PFAS in Albertville Utilities Board water: EPA UCMR 5 results." Data: U.S. EPA Fifth Unregulated Contaminant Monitoring Rule, final release August 2026, PWSID AL0000933. https://wellandtap.com/pfas/alabama/albertville-utilities-board/
About this data
Source: U.S. EPA, UCMR 5 occurrence data, final release August 2026 (PWSID AL0000933). Population: EPA SDWIS. Averages count results below the reporting level as zero, the same convention EPA uses for running annual averages. Full method.